How The Multilink Trunk Reacts To Losing Distributed Trunk Members; Figure 1-1. Baystack 410-24T Switch - Nortel BayStack 410 24T Using Manual

How the MultiLink Trunk Reacts to Losing Distributed Trunk Members

If your MultiLink Trunk
configuration and any of those units (or trunked MDAs) becomes inactive from a
loss of power or unit failure, the unaffected trunk members remain operational.
400-4FX MDA
Figure 1-46.
However, until you correct the cause of the failure or change the trunk Status field
to Disabled, you will be unable to modify any of the following parameters for the
affected trunk:
•
•
•
•
•
•
309985-B Rev 00
T1
BayStack 450-24T Switch
Loss of Distributed Trunk Members
VLAN Configuration
Spanning Tree Configuration
Port Mirroring Configuration
Port Configuration
IGMP Configuration
Rate Limiting Configuration
Introduction to the BayStack 410-24T Switch
(Figure 1-46) spans separate units in a stack
BayStack 410-24T Switches
400-4FX MDA
400-4FX MDA
400-4FX MDA
400-4FX MDA
Unit 1
Unit 2
Unit 3
Unit 4
Unit 5
Unit 6
Unit 7
Unit 8
BS41061A
1-75