Port Configuration; Figure 3-21. Port Configuration Screen (1 Of 2) - Nortel BayStack 410 24T Using Manual

10base-t switch
Table of Contents

Advertisement

Using the BayStack 410-24T 10BASE-T Switch

Port Configuration

The Port Configuration screen
configure specific switch ports or all switch ports. You can enable or disable the
port status of specified switch ports, set (optional) MDA ports to autonegotiate for
the highest available speed of the connected station, and you can set the duplex
mode for specific ports (autonegotiation is not supported on fiber optic ports).
You can disable switch ports that are trunk members; however, the screen prompts
for verification of the request before completing the action. Choosing [Yes]
disables the port and removes it from the trunk.
Note: The Autonegotiation fields, the Link Trap, the Speed fields, and the
Duplex fields are independent of MultiLink trunking, rate limiting, VLANs,
IGMP Snooping, and the STP.
Choose Port Configuration (or press p) from the Switch Configuration Menu
screen to open the Port Configuration screen.
Port
Trunk
Status
----
-----
------------
1
[ Enabled
2
[ Enabled
3
[ Enabled
4
[ Enabled
5
[ Enabled
6
1
[ Enabled
7
1
[ Enabled
8
[ Enabled
9
1
[ Enabled
10
[ Enabled
11
[ Enabled
12
[ Enabled
13
2
[ Enabled
14
2
[ Enabled
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-21.
Port Configuration Screen (1 of 2)
3-52
(Figure 3-21
Port Configuration
Unit:
[ 1 ]
Link
LnkTrap
-----
-------
]
Up
[ On
]
]
Up
[ On
]
]
Up
[ Off ]
]
Up
[ Off ]
]
Down
[ On
]
]
Up
[ On
]
]
Up
[ On
]
]
Down
[ Off ]
]
Up
[ On
]
]
Down
[ On
]
]
Up
[ Off ]
]
Up
[ Off ]
]
Up
[ On
]
]
Up
[ On
]
Press Ctrl-C to return to Main Menu.
and
Figure
3-22) allows you to
Autonegotiation
---------------
[ Enabled
]
[ Enabled
]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Enabled
]
[ Enabled
]
[ Disabled ]
[ Enabled
]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Enabled
]
[ Enabled
]
Speed
Duplex
-----------------
[ 100Mbs / Half ]
[ 10Mbs
/ Full ]
[ 10Mbs
/ Full ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
[ 100Mbs / Half ]
[ 100Mbs / Full ]
[ 100Mbs / Half ]
[ 10Mbs
/ Half ]
[ 10Mbs
/ Half ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
More...
309985-B Rev 00

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 410-24t

Table of Contents