Using the BayStack 410-24T 10BASE-T Switch
Configuring IGMP Snooping
To create or modify IGMP Snooping ports, follow the flowcharts in
Figures
Choose IGMP Configuration (or press g) from the Switch Configuration Menu
screen to open the IGMP Configuration screen.
IGMP Configuration screen
created/port members
Figure C-7.
C-8
C-7
to C-9).
Are VLANs
No
configured?
Yes
Is the
No
Snooping field set
correctly?
Yes
Is
No
Snooping field
set?
Yes
Is
No
the Proxy field set
correctly?
Yes
2
Configuring IGMP Snooping (1 of 3)
Go to VLAN flowchart. Create VLANs/
configure port members, as required.
Set the correct value
for the Snooping field.
2
Set the correct value
for the Proxy field.
Key
Off-page reference
On-page reference
BS41055A
309985-B Rev 00