This appendix describes the BayStack 410-24T switch port connectors and pin
assignments.
RJ-45 (10BASE-T/100BASE-TX) Port Connectors
The RJ-45 port connectors
stations without using crossover cables. (See
page D-2
For 10BASE-T connections, use Category 3 (or higher) UTP cable. When using
10BASE-T/100BASE-TX MDAs, use only Category 5 UTP cable.
1
Figure D-1.
309985-B Rev 00
Connectors and Pin Assignments
for information about MDI-X ports.)
8
616EA
RJ-45 (8-Pin Modular) Port Connector
(Figure
D-1) are wired as MDI-X ports to connect end
"MDI and MDI-X
Appendix D
Devices" on
D-1