Nortel BayStack 410 24T Using Manual page 74

Using the BayStack 410-24T 10BASE-T Switch
To configure the VLAN port membership for VLAN 1:
Select Switch Configuration from the BayStack 410-24T switch Main
1.
Menu (or press w).
From the Switch Configuration Menu, select VLAN Configuration (or
2.
press v).
From the VLAN Configuration Menu select VLAN Configuration (or
3.
press v).
The default VLAN Configuration screen opens
Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 UUUUUU
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-26. Default VLAN Configuration Screen Example
The VLAN Configuration screen settings shown in
settings with all switch ports classified as untagged members of VLAN 1.
Figure 1-27
support the VLAN 3 broadcast domain shown in
optional).
1-46
VLAN Configuration
[ 1 ]
[ ]
[ VLAN #1 ]
Port Membership
7-12
------
UUUUUU
shows the VLAN Configuration screen after it is configured to
(Figure
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
Press Ctrl-C to return to Main Menu.
Figure 1-26
Figure 1-25
1-26):
[ Port-Based
None
[ 0x0000 ]
[ Active
are default
(VLAN Name is
309985-B Rev 00
]
]
]