Figure 3-17. Vlan Configuration Screen - Nortel BayStack 410 24T Using Manual

Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 UUUUUU
Unit #2 UUUUUU
Unit #3 UUUUUU
Unit #4 UUUUUU
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of
VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-17. VLAN Configuration Screen
Table 3-13
Table 3-13. VLAN Configuration Screen Fields
Field
Create VLAN
309985-B Rev 00
VLAN Configuration
[ 1 ]
[ ]
[ VLAN #1 ]
Port Membership
7-12 13-18
------ ------
UUUUUU UUUUUU
UUUUUU UUUUUU
UUUUUU UUUUUU
UUUUUU UUUUUU
describes the VLAN Configuration screen fields.
Description
Allows you to set up or view configured VLAN workgroups. Enter the number of the
new VLAN you want to create or view, then press [Enter]. The Port Membership
fields indicate the corresponding VLAN workgroup configuration, if configured, or all
dashes (-), indicating no VLAN Members configured. Alternatively, you can use the
space bar to toggle through the various configured VLAN workgroups. You can
create up to 64 different VLANs (including VLAN 1).
Default 1
Range 2 to 4094
Using the Console Interface
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
19-24 25-28
------ ------
UUUUUU UUUU
UUUUUU
UUUUUU
UUUUUU
Press Ctrl-C to return to Main Menu.
[ Port-Based
None
[ 0x0000 ]
[ Active
(continued)
3-41
]
]
]