Nortel BayStack 410 24T Using Manual page 300

Table E-1. Factory Default Settings for the BayStack 410-24T Switch
Appears in this CI screen
Renumber Stack Units (page 3-89)
(Only appears when the switch is a
participant in a stack configuration.)
Spanning Tree Port Configuration
(page 3-93)
Spanning Tree Switch Settings (page 3-96)
TELNET Configuration (page 3-99)
Field
New Unit Number
Renumber units with new
setting?
Unit
Participation
Priority
Path Cost
Bridge Priority
Designated Root
Root Port
Root Path Cost
Hello Time
Maximum Age Time
Forward Delay
Bridge Hello Time
Bridge Maximum Age Time
Bridge Forward Delay
TELNET Access
Login Timeout
Login Retries
Inactivity Timeout
Event Logging
Allowed Source IP Address
(10 user-configurable fields)
(continued)
Default setting
Current stack order
No
1
Normal Learning
128
10 or 100
8000 (read only)
8000 (bridge_id) (read only)
Unit: 0 / Port: 0 (read only)
0 (read only)
2 seconds (read only)
20 seconds (read only)
15 seconds (read only)
2 seconds (read only)
20 seconds (read only)
15 seconds (read only)
Enabled
1 minute
3
15 minutes
All
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
(continued)