Configuration File; Figure 3-44. Configuration File Download/Upload Screen - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Configuration File

The Configuration File Download/Upload screen
store your switch/stack configuration parameters on a TFTP server.
You can retrieve the configuration parameters of a standalone switch or an entire
stack and use the retrieved parameters to automatically configure a replacement
switch or stack. Certain requirements apply when automatically configuring a
switch or stack using this feature (see "Requirements" on
set up the file on your TFTP server and set the filename read/write permission to
Enabled before you can save the configuration parameters.
Although most configuration parameters are saved to the configuration file,
certain parameters are not saved (see
Choose Configuration File (or press g) from the main menu to open the
Configuration File Download/Upload screen.
Configuration Image Filename:
TFTP Server IP Address:
Copy Configuration Image to Server:
Retrieve Configuration Image from Server:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 3-44. Configuration File Download/Upload Screen
Table 3-39
3-106
Configuration File Download/Upload
describes the Configuration File Download/Upload screen fields:
(Figure
Table 3-40 on page
[ ]
[ xxx.xxx.xxx.x ]
[ No ]
[ No ]
Press Ctrl-C to return to Main Menu.
3-44) allows you to
page 3-107). You must
3-108).
309985-B Rev 00