Using The Console Interface; Accessing The Ci Menus And Screens - Nortel BayStack 410 24T Using Manual

This chapter describes how to configure and manage the BayStack 410-24T
switch using the menu-driven console interface (CI).
This chapter covers the following topics:
•
•
•

Accessing the CI Menus and Screens

You can access the CI menus and screens locally through a console terminal,
remotely through a dial-up modem connection, or in-band through a TELNET
session (see "Console/Comm Port" on page 2-10).
You can also manage the BayStack 410-24T switch using Bay Networks Optivity
network management software or any generic SNMP-based management
software; however, certain parameters such as the switch IP address, or stack IP
address, if configured, must be supplied for the switch management function to
become fully operational (see "Initial Setup" on page page 2-17).
Note: If you have a properly configured BootP server in your network, it will
detect the IP address; you will not need to configure the IP address.
For information about SNMP, see your network management documentation.
309985-B Rev 00
Accessing the CI menus and screens
Using the CI menus and screens
Description of options available from the main menu

Using the Console Interface

Chapter 3
3-1