Telnet/Snmp Manager List Configuration; Figure 3-47. Telnet/Snmp Manager List Configuration Screen - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch

TELNET/SNMP Manager List Configuration

The TELNET/ SNMP Manager List Configuration screen (Figure 3-47) allows
you to specify up to 10 user-assigned host IP addresses that are allowed TELNET
and SNMP access to the switch. When you set the TELNET Access value to
Enabled, you can communicate with the BayStack 450 switch from a remote
console terminal and can have up to four active TELNET sessions at one time.
Note: In a mixed-stack configuration that includes one or more Business
Policy Switches, the Allowed Source IP Address list cannot be used for SNMP
security.
Choose TELNET/ SNMP Mgr List Configuration (or press t) from the main menu
to open the TELNET/ SNMP Manager List Configuration screen.
Allowed Source IP Address
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-47. TELNET/SNMP Manager List Configuration Screen
Table 3-41 describes the TELNET/SNMP Manager List Configuration screen
fields.
3-118
TELNET/SNMP Manager List Configuration
TELNET Access:
Login Timeout:
Login Retries:
Inactivity Timeout:
Event Logging:
[ Enabled ]
[ 1 minute ]
[ 3 ]
[ 15 minutes ]
[ All ]
Allowed Source Mask
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Press Ctrl-C to return to Main Menu.
309978-D Rev 01