Text Conventions - Nortel BayStack 410 24T Using Manual

Text Conventions

This guide uses the following text conventions:
bold text
italic text
screen text
[Enter]
[Ctrl]-C
309985-B Rev 00
Indicates command names and options and text that
you need to enter.
Example: Enter
show ip {alerts
Example: Use the
dinfo
Indicates file and directory names, new terms, book
titles, and variables in command syntax descriptions.
Where a variable is two or more words, the words are
connected by an underscore.
Example: If the command syntax is:
show at <valid_route>
is one variable and you substitute one value
valid_route
for it.
Indicates system output, for example, prompts and
system messages.
Example:
Set Trap Monitor Filters
Named keys in text are enclosed in square brackets.
The notation [Enter] is used for the Enter key and the
Return key.
Two or more keys that must be pressed simultaneously
are shown in text linked with a hyphen (-) sign.
|
routes}.
command.
Preface
xxv