Nortel BayStack 410 24T Using Manual page 213

Table 3-28. IGMP Configuration Screen Fields
Field
Set Router Ports
Static Router Ports
Configuring Ports as Static Router Ports
309985-B Rev 00
Description
Selects the IGMP version according to the IGMPv1 (Version 1) or IGMPv2 (Version
2) standard (see RFC 2236). Use this field in conjunction with the Static Router
Ports field (see next field description) to select the IGMP version to set.
You can also use this field to view which static router ports are set to Version 1 or to
Version 2. Use the space bar to toggle between the two versions and view the static
router ports settings.
This field affects all VLANs (for example, if you change the value of the Set Router
Ports field on the VLAN specified in the screen's VLAN field, ALL VLANs are
affected).
Default Value Version 1
Range Version 1, Version 2
Allows you to assign switch ports to receive all IP multicast-related traffic. When the
unit is part of a stack configuration, the screen displays the unit numbers of the
switches configured in the stack, along with the corresponding ports.
The configured ports do not filter any IP multicast traffic. The Static Router Ports
fields are displayed in six-port groups (for example, 1-6, 7-12, 13-18). The number
of ports displayed depends on the switch model or type of optional MDA that is
installed in the Uplink Module slot.
This field affects all VLANs (for example, if you assign a port as a static router port in
this screen, the port becomes a static router port for the VLAN specified in the
screen's VLAN field, and also for any other VLAN where this port is a member).
See also "Configuring Ports as Static Router
Default Value -
Range -, X
If you specify a port as a Static Router Port in the IGMP Configuration screen,
that port will receive all the IP Multicast-related information (such as, Host
Membership Report, Host Membership Query, and IP Multicast UDP data).
This feature is provided for certain legacy routers that are unable to
periodically generate a Host Membership Query. If you configure a port as a
static router port, the IP Multicast traffic can still be forwarded to any
dynamically detected IGMP routers.
Using the Console Interface
(continued)
Ports" following this table.
3-75