Table of Contents
Advertisement
DAS-3626:admin#show port_vlan 1-10
Command: show port_vlan 1-10
Global GVRP : Disabled
Port
PVID
------
----
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
Total Entries : 10
create dot1v_protocol_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a protocol group:
DAS-3626:admin#create dot1v_protocol_group group_id 1 group_name General_Group
Command: create dot1v_protocol_group group_id 1 group_name General_Group
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
GVRP
--------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Create a protocol group for protocol VLAN function.
create dot1v_protocol_group group_id <id 1-16> {group_name <name 32>}
This command is used to create a protocol group for protocol VLAN function.
group_id − The id of a protocol group which is used to identify a set of protocols.
group_name − The name of the protocol group. The maximum length is 32 characters.
Only Administrator and Operator-level users can issue this command.
Ingress Checking
---------------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
143
Acceptable Frame Type
---------------------
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
Advertisement
Table of Contents
