Table of Contents
Advertisement
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
config stp priority
Purpose
Used to configure the bridge priority.
Syntax
config stp priority <value 0-61440> instance_id <value 0-15>
Description
This command is used to update the STP instance configuration settings on the Switch. The
MSTP will utilize the priority in selecting the root bridge, root port and designated port.
Assigning higher priorities to STP regions will instruct the Switch to give precedence to the
selected instance_id for forwarding packets. The lower the priority value set, the higher the
priority.
priority <value 0-61440> − Select a value between 0 and 61440 to specify the priority for a
Parameters
specified instance ID for forwarding packets. The lower the value, the higher the priority. This
value must be divisible by 4096.
instance_id <value 0-15> − Enter the value corresponding to the previously configured
instance ID of which the user wishes to set the priority value. An instance id of 0 denotes the
default instance_id (CIST) internally set on the Switch.
231
Advertisement
Table of Contents
