Table of Contents
Advertisement
show authen_enable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DAS-3626:admin#show authen_enable all
Command: show authen_enable all
Method List Name
----------------
Permit
default
Total Entries : 2
DAS-3626:admin#
config authen application
Purpose
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the method list of authentication methods for promoting normal user level
privileges to Administrator level privileges on the Switch.
show authen_enable [default | method_list_name <string 15> | all]
This command is used to delete a user-defined method list of authentication methods for
promoting user level privileges to Administrator level privileges.
default – Entering this parameter will display the default method list for users attempting to
gain access to Administrator level privileges on the Switch.
method_list_name <string 15> − Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:
•
Method List Name – The name of a previously configured method list name.
•
Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).
•
Method Name – Defines which security protocols are implemented, per method list
name.
•
Comment – Defines the type of Method. User-defined Group refers to server groups
defined by the user. Built-in Group refers to the TACACS, XTACACS, TACACS+ and
RADIUS security protocols which are permanently set in the Switch. Keyword refers
to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+/RADIUS which are local (authentication through the
local_enable password on the Switch) and none (no authentication necessary to
access any function on the Switch).
None.
Priority
Method Name
--------
---------------
1
tacacs+
2
tacacs
3
Darren
4
local
1
tacacs+
2
local
Used to configure various applications on the Switch for authentication using a previously
Comment
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword
372
Advertisement
Table of Contents
