Table of Contents
Advertisement
show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCP relay configuration:
DAS-3626:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/Bootp Relay Status
DHCP/Bootp Hops Count Limit
DHCP/Bootp Relay Time Threshold : 23
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
Interface
Server 1
----------- -------------- -------------- -------------- --------------
DAS-3626:admin#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DAS-3626:admin#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
DHCP/Bootp Relay Status
DHCP/Bootp Hops Count Limit
DHCP/Bootp Relay Time Threshold : 23
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
Interface
Server 1
----------- -------------- -------------- -------------- --------------
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the current DHCP/BOOTP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
This command will display the current DHCP relay configuration for the Switch, or if an IP
interface name is specified, the DHCP relay configuration for that IP interface.
ipif <ipif_name 12> − The name of the IP interface for which to display the current DHCP
relay configuration.
None.
: Disabled
: 2
Server 2
: Disabled
: 2
Server 2
: Disabled
: Disabled
Server 3
: Disabled
: Disabled
Server 3
82
Server 4
Server 4
Advertisement
Table of Contents
