Table of Contents
Advertisement
show lacp_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
DAS-3626:admin#show lacp_port 1-10
Command: show lacp_port 1-10
Port
Activity
------
--------
1
Active
2
Active
3
Active
4
Active
5
Active
6
Active
7
Active
8
Active
9
Active
10
Active
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display current LACP port mode settings.
show lacp_port {<portlist>}
This command will display the LACP mode settings as they are currently configured.
<portlist> − Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP status for all ports.
None.
159
Advertisement
Table of Contents
