D-Link DAS-3636 Cli Reference Manual page 442

config vdsl profile [SRADn|SRAUp]
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile vdsl profile Downstream/Upstream SRA
DAS-3626:admin#config vdsl profile name default SRADn state enable
Command: config vdsl profile name default SRADn state enable
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to config vdsl profile Downstream/Upstream SRA.
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] [SRADn|SRAUp]
[state [disable|enable]|downshiftSnr <int 0-310>|upshiftSnr <int 0-310> |
downshiftDuration <int 0-16383>|upshiftDuration <int 0-16383>]
This command is used to config vdsl profile Downstream/Upstream SRA.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
[SRADn|SRAUp]–To config VDSL profile Downstream/Upstream SRA.
state [disable|enable]–enable/disable Downstream/Upstream SRA
downshiftSnr <int 0-310>–Downstream/Upstream down-shift noise margin.The range is 0-310
(in unit of 0.1 dB)
upshiftSnr <int 0-310>–Downstream/Upstream up-shift noise margin.The range is 0-310 (in
unit of 0.1 dB)
downshiftDuration <int 0-16383>–Downstream/Upstream down-shift minimum time interval.The
range is 0-16383 (in unit of 1sec).
upshiftDuration <int 0-16383>–Downstream/Upstream up-shift minimum time interval.The range
is 0-16383 (in unit of 1sec).
Only Administrator-level users can issue this command.
437