D-Link DAS-3636 Cli Reference Manual page 330

config ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure SSH algorithm:
DAS-3626:admin#config ssh algorithm blowfish enable
Command: config ssh algorithm blowfish enable
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure the SSH algorithm.
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |
twofish128 | twofish192 | twofish256 | MD5 | SHA1 | RSA | DSA] [enable | disable]
This command is used to configure the desired type of SSH algorithm used for authentication
encryption.
3DES – This parameter will enable or disable the Triple_Data Encryption Standard encryption
algorithm.
AES128 − This parameter will enable or disable the Advanced Encryption Standard AES128
encryption algorithm.
AES192 − This parameter will enable or disable the Advanced Encryption Standard AES192
encryption algorithm.
AES256 − This parameter will enable or disable the Advanced Encryption Standard AES256
encryption algorithm.
arcfour − This parameter will enable or disable the Arcfour encryption algorithm.
blowfish − This parameter will enable or disable the Blowfish encryption algorithm.
cast128 − This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 − This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 − This parameter will enable or disable the twofish192 encryption algorithm.
MD5 − This parameter will enable or disable the MD5 Message Digest encryption algorithm.
SHA1 − This parameter will enable or disable the Secure Hash Algorithm encryption.
RSA − This parameter will enable or disable the RSA encryption algorithm.
DSA − This parameter will enable or disable the Digital Signature Algorithm encryption.
[enable | disable] – This allows the user to enable or disable algorithms entered in this
command, on the Switch.
Only Administrator and Operator-level users can issue this command.
325