D-Link DAS-3636 Cli Reference Manual page 382

delete authen server_host
Restrictions
Example usage:
To delete a user-defined TACACS+ authentication server host:
DAS-3626:admin#delete authen server_host 10.1.1.121 protocol tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DAS-3626:admin#
show authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server hosts currently set on the Switch:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Only Administrator-level users can issue this command.
Used to view a user-defined authentication server host.
show authen server_host
This command is used to view user-defined authentication server hosts previously created on
the Switch.
The following parameters are displayed:
IP Address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will include TACACS,
XTACACS, TACACS+ or RADIUS.
Port – The virtual port number on the server host. The default value is 49.
Timeout − The time in seconds the Switch will wait for the server host to reply to an
authentication request.
Retransmit − The value in the retransmit field denotes how many times the device will resend
an authentication request when the TACACS server does not respond. This field is
inoperable for the tacacs+ protocol.
Key − Authentication key to be shared with a configured TACACS+ server only.
None.
Only Administrator-level users can issue this command.
377