D-Link DAS-3636 Cli Reference Manual page 200

enable mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable MLD snooping on the switch:
DAS-3626:admin#enable mld_snooping
Command: enable mld_snooping
Success.
DAS-3626:admin#
disable mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable MLD snooping on the switch:
DAS-3626:admin#disable mld_snooping
Command: disable mld_snooping
Success.
DAS-3626:admin#
show mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to enable MLD snooping on the switch.
enable mld_snooping
This command is used to enable MLD snooping on the switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable MLD snooping on the switch.
disable mld_snooping
This command is used to disable MLD snooping on the switch. Disabling MLD snooping
allows all MLD and IPv6 multicast traffic to flood within a given IPv6 interface.
None.
Only Administrator and Operator-level users can issue this command.
Used to the current status of MLD snooping on the switch.
show mld_snooping {[vlan <vlan_name 32> | vlanid <vidlist>]}
This command is used to display the current MLD snooping configuration on the switch.
vlan_name − The name of the VLAN for which you want to view the MLD snooping
configuration.
vlanid list – The VIDs of the VLAN for which you want to view the MLD snooping
configuration.
If no parameter specified, the system will display all current MLD snooping configurations.
None.
195