D-Link DAS-3636 Cli Reference Manual page 104

delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DAS-3626:admin#delete snmp group sg1
Command: delete snmp group sg1
Success.
DAS-3626:admin#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
This command is used to remove an SNMP group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that will identify the SNMP
group the new SNMP user will be associated with.
Only Administrator-level users can issue this command.
Used to display the group-names of SNMP groups currently configured on the Switch. The
security model, level, and status of each group are also displayed.
show snmp groups
This command is used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also displayed.
None.
None.
99