D-Link DAS-3636 Cli Reference Manual page 305

disable ssl
Restrictions
Example usage:
To disable the SSL status on the Switch:
DAS-3626:admin#disable ssl
Command: disable ssl
Success.
DAS-3626:admin#
To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
DAS-3626:admin#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Success.
DAS-3626:admin#
config ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DAS-3626:admin#config ssl cachetimeout 7200
Command: config ssl cachetimeout 7200
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Only Administrator-level users can issue this command.
Used to configure the SSL cache timeout.
config ssl cachetimeout timeout <value 60-86400>
This command will set the time between a new key exchange between a client and a host
using the SSL function. A new SSL session is established every time the client and host go
through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the
master key on future connections with that particular host, therefore speeding up the
negotiation process.
timeout <value 60-86400> − Enter a timeout value between 60 and 86400 seconds to specify
the total time an SSL key exchange ID stays valid before the SSL module will require a new,
full SSL negotiation for connection. The default cache timeout is 600 seconds
Only Administrator-level users can issue this command.
300