The switch password recovery commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
reset config
reboot
reset account
reset password
show account
Each command is listed, in detail, in the following sections.
NOTE: All Password revovery commands can be executed in password revovery mode. If you
wish to enter the Switch into password recovery mode, simply press " ^ "after the system has
booted up successfully and loaded the runtime image to 100%.
Boot Procedure
--------------------------------------------------------------------
Power On Self Test.................................100%
MAC Address : 00-80-C2-11-22-00
H/W Version : A1
Please wait, loading V1.00.B035 Runtime image......100%
Password Recovery Mode
>_
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
{force_agree}
{force_agree}
{<username>}
P
R
ASSWORD
ECOVERY
466
C
OMMAND
V1.00.B006
41
L
IST