ABLE OF ONTENTS ABOUT THIS GUIDE ...1 URPOSE VERVIEW OF THIS INTRODUCTION THERNET WITCHING ECHNOLOGY ...4 EATURES ...6 NPACKING ...6 ETUP IDENTIFYING EXTERNAL COMPONENTS RONT ANEL LED I NDICATORS ANEL ...8 CONNECTING THE DSS-8+ DSS-8+ ...10 DSS-8+ UB TO A. 10BASE-T Hub B.
Page 3
DSS-8+ TO SWITCH A. Using straight cable B. Using crossover cable & D PEED INSTRUCTIONS FOR USE OF STACKING BRACKETS ...13 RJ-45 PIN SPECIFICATION TECHNICAL SPECIFICATIONS OTHER DEVICES ...12 ...12 ...12 UPLEX ...11 ...14 ...16...
BOUT Congratulations on your purchase of the DSS-8+. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Purpose The purpose of this manual is to show you how to install and configure your DSS-8+. Overview of this User’s Guide Chapter 1, Introduction.
Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges...
Page 6
Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area network into different segments, which don’t compete with each other for network transmission capacity.
The DSS-8+ is expandable by cascading two or more DSS-8+s together. As all ports support 200Mbps, the DSS-8+ can be cascaded from any port and to any number of DSS-8+s.
Page 8
Store and forward switching scheme capability. As the result of complete frame checking and error frame filtering, this scheme prevents error packages from transmitting among segments. NWay Auto-negotiation for any port. This allows for auto- sensing of speed (10/100Mbps) thereby providing you with automatic and flexible solutions in your network connections.
Unpacking and Setup This chapter provides unpacking and setup information for the DSS-8+. Unpacking Open the box and carefully unpacks its contents. The box should contain the following items: One DSS-8+ One external power adapter One pair of Stacking Brackets This User’s Guide.
DENTIFYING This section identifies all the major external components of the DSS-8+. Both the front and rear panels are shown followed by a description of each panel feature. The indicator panel is described in detail in the next chapter. Front Panel The figure below shows the front panel of the DSS-8+.
AC power input voltage. (Power Jack is on the right side of the device) Since the DSS-8+ does not include a power switch, plugging its power adapter into a power outlet will immediately power it on. MDI-X Jacks: Use these jacks to connect stations to the hub. These...
Page 12
Ethernet switch, you should use a crossover cable, or make the connection using the MDI-X jack (described below). Uplink Jack(s) (MDI-II): Use this jack to connect stations to the hub. This is an MDI-II (Medium-dependent Interface, straight-...
ONNECTING This chapter describes how to connect the DSS-8+ to your Fast Ethernet network. In each of the following figures, the DSS-8+ is shown. PC to DSS-8+ A PC can be connected to DSS-8+ via a two-pair Category 3, 4, 5 UTP/STP straight cable.
(MDI-X) ports of the DSS-8+ to any port of the Hub. DSS-8+ to switch (other devices) The DSS-8+ can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable.
When using straight cable, this is done from the uplink (MDI-II) port of the DSS-8+ (DSS-8+ A) to any of the 10Mbps or 100Mbps (MDI- X) port of the other switch (switch B) or other devices. B. Using crossover cable...
RJ-45 P When connecting your DSS-8+ to another switch, a bridge or a hub, a modified crossover cable is necessary. Please review these products for matching cable pin assignment. The following diagram and tables show the standard RJ-45 receptacle/connector and their pin assignments for the switch-to- network adapter card connection, and the straight / crossover cable for the DSS-8+-to-switch/hub/bridge connection.
Page 18
The standard RJ-45 receptacle/connector The following shows straight cable and crossover cable connection: Straight cable for DSS-8+ (uplink MDI-II port) to switch/Hub or other devices connection Crossover cable for DSS-8+ (MDI-X port) to switch/hub or other network devices (MDI-X port) connection...
Physical and Environmental DC inputs DC7.5V/1.5A Power 11.25 watts. (max.) Consumption Temperature Operating: 0° ~ 50° C, Storage: -10° ~ 70° C Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90% Dimensions 190 x116 x 32 mm (W x H x D) EMI: FCC Class B, CE Mark B, VCCI-II Transmissio...
FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LIMITED WARRANTY D-Link provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Link products described below (“Hardware”) will be free...
Page 23
D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Link’s sole obligation shall be to replace the non- conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the Software.
Page 24
RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.
Page 25
PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES...
Trademarks Copyright 1999 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or...