D-Link DAS-3636 Cli Reference Manual page 199

config mld_snooping mrouter_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set up port range 1-10 to be static router ports:
DAS-3626:admin#config mld_snooping mrouter_ports vlan default add 1-10
Command: config mld_snooping mrouter_ports vlan default add 1-10
Success.
DAS-3626:admin#
config mld_snooping mrouter_ports_forbidden
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set up port range 1-10 to static router ports:
DAS-3626:admin#config mld_snooping mrouter_ports_forbidden vlan default add 1-10
Command: config mld_snooping mrouter_ports_forbidden vlan default add 1-10
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure ports as router ports.
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vidlist>] [add|
delete] <portlist>
This command is used to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the
multicast-enabled router − regardless of protocol, etc.
vlan_name − The name of the VLAN for which MLD snooping is to be configured.
vlanid list – The VIDs of the VLAN for which MLD snooping is to be configured.
add | delete − Specifies to add or delete the router ports.
portlist − Specifies a range of ports to be configured.
Only Administrator and Operator-level users can issue this command.
Used to configure ports as forbidden router ports.
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid
<vidlist>] [add|delete] <portlist>
This command is used to designate a range of ports as being not connected to multicast-
enabled routers. This ensures that the forbidden router port will not propagate routing
packets out.
vlan_name − The name of the VLAN for which MLD snooping is to be configured.
vlanid list – The VIDs of the VLAN for which MLD snooping is to be configured.
add | delete − Specifies to add or delete the router ports.
portlist − Specifies a range of ports to be configured as forbidden router ports.
Only Administrator and Operator-level users can issue this command.
194