D-Link DAS-3636 Cli Reference Manual page 421

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show vdsl line
Purpose Used to show VDSL line status.
Syntax show vdsl line [<portlist>|all] [bit_map | snr_margin_map | psd_map | attenuation_map
| status {brief} | loop_diagnostic | pm_counters [15mins|1day]]
Description This command is used to show VDSL line status,such as bit map , SNR margin map , PSD
map , attenuation map ,line status ,loop diagnostic result
Parameters [<portlist>|all] – The list of port numbers to config
bit_map −display VDSL line per-tone bit map
snr_margin_map −display VDSL line per-tone SNR Margin map.
psd_map −display VDSL line per-tone PSD map .
attenuation_map −display VDSL line per-tone attenuation map.
status −display VDSL line status
loop_diagnostic−display VDSL line loop diagnostic result.
pm_counters − [15mins | 1day] −display VDSL 15 minute or 1 day performance counter.
416