Vlan Counter Commands - D-Link DAS-3636 Cli Reference Manual

The VLAN counter commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create vlan_counter
delete vlan_counter
clear vlan_counter statistics
show vlan_counter
show vlan_counter statistics
Each command is listed, in detail, in the following sections.
create vlan_counter
Purpose This command creates the control entry for VLAN traffic flow statistics.
Syntax create vlan_counter [vlan <vlan_name> | vlanid < vidlist >]
Description This command is used to create control entries to count statistics for specific VLANs, or to
count statistics for specific ports on specific VLANs. The statistics can be either byte count or
packet count. The statistics can be counted for different frame types.
Parameters vlan_name – Specifies the VLAN name.
vidlist – Specifies a list of VLANs by VLAN ID.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To begin counting packet levels for broadcast packets on VLAN 1:
DAS-3626:admin#create vlan_counter vlanid 25
Command: create vlan_counter vlanid 25
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
[vlan <vlan_name> | vlanid < vidlist >]
[ all | [vlan <vlan_name> | vlanid < vidlist > ]
{ [ vlan <vlan_name> ] }
{ [ vlan <vlan_name> ]
VLAN C
273
29
C
OUNTER OMMANDS