D-Link DAS-3636 Cli Reference Manual page 34

DAS-3626:admin#config command_prompt AtYourService
Command: config command_prompt AtYourService
Success.
AtYourService:admin5#
config greeting _message
Purpose Used to configure the login banner (greeting message).
Syntax config greeting _message {default}
Description This command is used to modify the login banner (greeting message).
Parameters default – If the user enters default to the modify banner command, then the banner will be
reset to the original factory banner.
To open the Banner Editor, click enter after typing the config greeting_message command.
Type the information to be displayed on the banner by using the commands described on the
Banner Editor:
Quit without save:
Save and quit:
Move cursor:
Delete line:
Erase all settings:
Reload original settings:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Ctrl+C
Ctrl+W
Left/Right/Up/Down
Ctrl+D
Ctrl+X
Ctrl+L
29