Table of Contents
Advertisement
create cfm mep
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a CFM MEP.
DAS-3626:admin#create cfm mep mep1 mepid 1 md op_domain ma op1 direction
inward port 2
Command: create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward port 2
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to create a cfm MEP.
create cfm mep <string 32> mepid <int 1-8191> md <string 22> ma <string 22>
direction [inward | outward] port <port>
Different MEP in the same MA must have different MEP ID. MD name, MA name, and MEP
ID together can identify a MEP.
Different MEP on the same device must have a different MEP name.
Before an MEP is created, its MEPID should be configured in MA's MEPID list.
mep – Specifies the MEP name. It's unique among all MEPs configured on the device.
mepid – Specifies the MEP MEPID. It should be configured in MA's MEPID list.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
direction – Specifies the MEP direction.
inward – Specifies the inward facing (up) MEP.
outware – Specifies the outward facing (down) MEP.
port – Specifies the port number. This port should be a member of the MA's associated
VLAN.
Only Administrator and Operator-level users can issue this command.
259
Advertisement
Table of Contents
