Fax Software Switch - Sharp AR-FX12 Service Manual

6. FAX software switch

A. SOFT SW SETUP CHANGE QUICK REFERENCE
Large item Medium item
Dial (Calling) Remote
machine
calling disable
Signal
detection
Redial Remote
machine not
responding
Error
Error
Error
Busy
Busy
Busy
Reception Not receiving
(Calling)
CI detection
disable
External External
telephone telephone
handset connection
External
telephone off-
hook detection
Remote switch
number
Remote switch
setup
Content of switch
Detection of line current when dialing
Dial call wait time
Pause time setup (between dialing)
Tone/Pulse default setup (Dial ringing signal
setup)
•DTMF signal level (high group)
•DTMF send level (low group)
•DTMF signal send time
•DTMF minimum pause time setup
Make time (10PPS) setup
Break time (10PPS)setup
Minimum pause (10PPS)setup
Busy tone detection
Busy tone detection cycle
DT/BT detection level
Dial tone detection
Dial tone monitor time
Lower limit of busy tone detection time
(ON time)
Upper limit of busy tone detection time
(ON time)
Frequency range setup for detection of DT/
BT
Resend when no response from the other
party
Number of times of recall in communication
error
Recall allowed in communication error
Recall interval in communication error
Recall interval in busy state
Number of times of recall in busy
Recall allowed in busy
Number of calls for auto receives
Auto/Manual default setup
Lower limit of call signal ON time
Upper limit of call signal ON time
Lower limit of call signal OFF time
Upper limit of call signal OFF time
Call signal OFF non-detection time
External telephone connection
External telephone off-hook detection time
Remote switch number setup
Remote reception instruction
Notification to external telephone in remote
switch
Remote switch operation allowed
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-25
Key operator Soft SW No.
SW 70-5 Dial disable
SW 62-1~2 Dial disable/Erroneous dialing
Initial setup SW 70-1~4 Dial disable/Erroneous dialing
Initial setup SW 62-5~6 Dial disable
SW 66-5~8 Dial disable in PB (PB/FAX service, etc.)
SW 67-1~4 Dial disable in PB (PB/FAX service, etc.)
SW 68-1~5 Dial disable in PB (PB/FAX service, etc.)
SW 69-1~8 Dial disable in PB (PB/FAX service, etc.)
SW 63-1~4 Dial disable in pulse
SW 63-5~8 Dial disable in pulse
SW 64-1~4 Dial disable in pulse
SW 71-3 Busy tone detection disable
SW 71-4~5 Busy tone detection error
SW 71-6~7 Busy tone detection disable
SW 70-6 Dial tone detection disable
SW 70-7 Dial tone detection error
SW 72-1~2 Busy tone detection error
SW 72-3~4 Busy tone detection error
SW 71-1~2 Dial tone/busy tone detection error
SW 56-8 No recall wanted when remote machine
not responding
send setup SW 57-5~8
Send setup SW 59-3
SW 58-5~8
send setup SW 57-1~4
send setup SW 58-1~4
send setup SW 59-2
Receive SW 3-5~8 Number of reception call
setup
User setup SW 7-2 Initial setup of auto reception/manual
reception
SW 75-1~4 CI signal detection disable
SW 75-5~8 CI signal detection disable
SW 76-1~4 Ci signal detection disable
SW 76-5~6 CI signal detection disable
SW 77-1~4 CI signal detection disable
Initial setup SW 3-2 External telephone connection
SW 12-1~8 External telephone off-hook detection
error
Initial setup SW 13-1~8 Remote switch detection error
SW 14-1 Remote switch inhibit
SW 14-2
SW 14-3 Remote switch is made when calling
from external telephone.
Purpose of use