Sharp AR-FX12 Service Manual page 41

SW Bit Item
No. No.
6 7 Rotation send selection
(A5R A5)
(INVOICE-R
INVOICE)
8 EEPROM access inhibit When an access trouble to EEPROM in the modem controller occurs, FAX
7 1 Not used
2 Auto/Manual default
setup
3,4 Not used
5 Remaining memory
capacity for reception
6 Memory over during
reception
7,8 Not used
8 1,2 Image capacity in
polling
(reflected on DTC)
3 Error page output
selection in FAX
reception error
4 Quick online/memory
transmission selection
5-8 Number of pages of dial
ringing in quick online
transmission
9 1-6 Not used
Switch selection and function
Used to set whether A5R document is transmitted to A4 width (A5R) or the scan
image is rotated and transmitted in A4 width (A5).
1: Send as A4 width
document (A5R)
without rotating
operation cannot be performed. When this item is set to INHIBIT, FAX operation
can be performed.
The modem controller adjustment values (part of soft switch) are saved in
EEPROM.
ALLOW or INIHIBIT of access to EEPROM is set.
1: Access to EEPROM
inhibited
Used to select automatic reception or manual reception. (Do not set to manual
reception when handset or external telephone is not connected. However,
setting is possible and reception with on-hook key is possible.) In the manual
reception mode, when the machine is in the nighttime FAX mode, the machine
is booted but reception ringing is not made.
1: Manual reception
Used to set whether call-in is made until remaining memory capacity reaches
64KB or less or 128KB or less.
1: Call-in until remaining
memory is 64KB or less.
Used to set whether received data are outputted or disregarded without
outputting in case of memory over during reception.
1: Received data are not
outputted.
Used to set image capacity of the machine when polling. It is reflected on DTC,
and is unrelated to SW5-2-5 (Image capacity during reception).
Bit No.
Standard
Fine
Super fine
Ultra fine
Used to set whether error page is outputted or disposed without outputting in
case of a communication error during FAX reception.
1: Error page is not outputted. 0: Error page is outputted.
When, however, an error occurs during F code relay instruction reception or F
code confidential reception, the error page is not outputted regardless of this
SW setup.
Used to select quick online transmission mode or memory transmission mode.
1: Memory transmission
Used to set the number of pages of scanning at the dial ringing timing in quick
online transmission. Can be set in the range of 1~15 pages by binary input.
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-29
0: Send as A4 width
document (A5) with
rotating
0: Access to EEPROM
allowed
0: Auto reception
0: Call-in until remaining
memory is 128KB or less.
0: Received data are
outputted.
1 2
1 1
1 0
0 1
0 0
0: Quick online
transmission
USA Initial value Key
operator
0 Rotate Send setup
0 Access
allowed
0
0 Auto User setup
reception
0
0
0 128KB or
less
0 Output
0
0
0 Ultra fine
0
0 Output
0 Quick online Send setup
transmissio
n
0 1 page
0
0
1
0
1
1
0
0
0