Sharp AR-FX12 Service Manual page 40

SW Bit Item
No. No.
4 5 Not used
6 F code relay broadcast
function
7 F code confidential
reception
8 F code communication
error process
5 1 F code password
transmission setup
when the other party
has no function of
password
2,3 Image quality in
reception
(Reflected on DIS, not
reflected on DTC)
4-8 Not used
6 1 SUB capacity in
reception
2 SEP capacity in
reception
3 Reception PWD/SID
capacity
4 Automatic reduction
send
5 Rotation send selection
(A4 A4R)
(LTR LTR-R)
6 Rotation send selection
(B5R B5)
(16K 16KR)
Switch selection and function
Used to set whether relay broadcast transmission is made by receiving F code
relay broadcast instruction from the other party or F code relay broadcast
instruction is not received (even though the relay box number by SUB is
matched on). Though this item is set to "without this function," F code relay
broad cast instruction can be transmitted.
1: F code relay
broadcast instruction
is received from
allowed party.
Used to set YES/NO of F code confidential reception from the other party (even
though the confidential box number is matched by SUB). Though this item is set
to NO, F code confidential transmission can be made.
1: F code confidential
reception inhibited (Judged
as a communication error.)
Used to set YES/NO of resend in F code transmission.
When, however, SW59-3 (Recall allow in communication error) is set to 0
(Inhibit), recall is not made.
1: Not resend
Used when the other party machine has no function of F code password in F
code transmission.
1: Send with password
Used to set reception image resolution in FAX reception ringing (DIS send).
Bit No.
Standard
Fine
Super fine
Ultra fine
Used to set SUB capacity (Bit 49) to "1" in reception (DIS send).
1: NO (Set to 0)
Used to set SEP capacity (Bit 47) to "1" in reception (DIS send)
1: NO (Set to 0)
Used to set PWD/SID capacity (Bit 50) to "1" in reception (DIS send).
1: NO (Set to 0)
Used to set whether the transmitted document is reduced or the both ends are
cut when the transmitted document size is greater than the recording paper size
(width) in the other party's machine.
1: Send by cutting both edges without
reduction
Used to set whether A4 document is transmitted in A3 width (A4) or A4
document is rotated and transmitted in A4R.
1: Send as A3 width
document (A4) without
rotating
Used to set whether B5R document is transmitted in A4 width (B5R) or the scan
image is rotated and transmitted in B4 width (B5).
1: Send as A4 width
document (B5R)
without rotating
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-28
0: F code relay broadcast
instruction is not received
even from allowed party.
(Judged as
a communication error.)
0: F code confidential
reception allowed.
0: Resend
0: Disconnecting of line
with DCN
2 3
1 1
1 0
0 1
0 0
0: YES (Set to 1)
0: YES (Set to 1)
0: YES (Set to 1)
0 Send by
reduction
0: Send as A4 width
document (A4R) with
rotating
0: Send as B4 width
document (B5) with
rotating
USA Initial value Key
operator
0
0 Not Receive
0 Receive
0 Resend
0 Line dis-
connection
with DCN
0 Ultra fine
0
0
0
0
0
0
0 YES
0 YES
0 YES
0 Reduction Send setup
setup
0 Rotate Send setup
0 Rotate Send setup