Machine Operation; Key Operator Program - Sharp AR-FX12 Service Manual

[7] MACHINE OPERATION

1. Key operator program

KEY OPERATOR PROGRAM
Operation Default display setting.
settings
The number of direct address/sender keys
displayed setting
Must input next address key at broadcast setting
The number of file name/subject keys displayed
setting*1
Initial resolution setting
Scan complete sound setting
Default exposure settings
Fax Fax own number and name set
default
Dial mode setting
settings
Auto wake up print
Pause time setting
Speaker volume settings
Original print on transaction report
Remote reception number setting*2
Transaction report print select setting
Activity report print select setting
ECM*3
Distinctive ring detection
Disable of fax number direct entry
Fax send Auto reduction sending setting
settings
Rotation sending setting
Printing page number at receiver
Call timer at memory sending
Date/own number print position setting
Recall in case of line busy
Recall in case of communication error
Quick on line sending
*1 When the network scanner option is installed
*2 When extension phone is connected
*3 This setting is only effective if the other machine is a G3 machine that supports ECM
[ADDRESS BOOK] (ABC)/
[ADDRESS BOOK] (Group)/
[FAX]/
[E-MAIL/FTP] (when the network scanner option is
installed)/
[INTERNET-FAX] (when the network scanner option
is installed)/
[SWITCH AUTOMATICALLY TO COPY MODE
SCREEN]
6*/8/12
(When the network scanner option is installed, the
selections are 6 and 9.)
omit*/not omit
3/6
standard*/fine/fine(half tone)/super fine/
super fine(half tone)/ultra fine/ ultra fine(half tone)
Low/High/Off
Auto*/Manual
Tone*/Pulse
Enable*/ Disable
1,2* ~ 15sec
Speaker Low/Medium*/High
Ringer volume Low/Medium*/High /Off
Line monitor Low/Medium*/High /Off
Fax receive Low/Medium*/High /Off
Fax comm error Low/Medium*/High /Off
Enable*/ Disable / Print out error report only
0 ~ 5* ~ 9
Single sending Print out all report/Print out error report only*/
No printed report
Broadcasting Print out all report*/Print out error report only/
No printed report
Receiving Print out all report/Print out error report only/
No printed report*
Confidential reception Print out notice page*/Not print out notice page
Auto print Yes/No*
at memory full
Print daily Yes (hour/minute)/No*
at designated time
Enable*/ Disable
Pattern1 ~ 6/OFF*
Enable*/ Disable
Enable*/ Disable
Enable*/ Disable
Enable*/ Disable
30/45*/60sec
Outside the original image*/Inside the original image
Disable / Enable
(recall:1/2* - 14time interval:1 - 3*- 15min)
Disable / Enable
(recall:1/2* - 14time interval:1 - 3* - 15min)
Enable*/ Disable
AR-FX12 MACHINE OPERATION 7-1
Set value(Default)
Engine section LCD
Remark