Download Print this page

Sharp AR-FX12 Service Manual page 71

Hide thumbs Also See for AR-FX12:

Advertisement

Report code
(Communication
Display in the column of result
result)
59
RX NO F-CODE POLL
60
NO F-CODE POLL
61
RX POLL # NG
62
F POLL PASS # NG
63
NO F FUNC
64
NO F-CODE
67
F PASS # NG
68
BOX NO NG
69
MEMORY OVER
70
(JOB MEMORY OVER)
71
NG71XXXX*
72
NG72XXXX*
73
NG73XXXX*
74
NG74XXXX*
75
NG75XXXX*
76
NG76XXXX*
77
NG77XXXX*
78
NG78XXXX*
80
NG80XXXX*
81
NG REPORT
82
NO REPORT
83
NG LIMIT
84
REJECTED
85
NG85XXXX*
Content of communication interruption
In F code polling (calling), the remote machine has no DIS bit 47
(polling function).
In F code polling (calling), the called side has no send data. (DIS bit 9 is 0.)
In F code polling (calling), DCN is received for SEP. In bulletin board, there is no
send data for SEP.
In bulletin board, the sub address (bulletin board number (SEP)) is not matched. <B>
In bulleting board, the pass code (PWD) is not matched.
In F code sending, the remote machine has no DIS bit 49 (sub address function).
Check that the remote machine conforms to F code.
In F code sending :
<1>DCN is received for SUB. --- Check the box number.
<2>DCN is received for SID. --- Check the box number and pass code.
In F code receiving :
"F code relay broadcasting" or "F code confidential reception" is "Inhibited with
soft SW."
In F code receiving, the pass code (SID) is not matched.
In F code reception, a box number which is not registered is specified.
(SUB is not matched.)
Memory over in quick online sending
In PC-FAX reservation, the number of remote parties is exceeded.
In PC-FAX reservation, data sent from PC includes some errors.
In department management setting on the machine side:
•In reservation from PC-FAX or PC-IFAX, a department number which is not
registered on the machine side is specified.
•In reservation from PC-FAX or PC-IFAX, the department number is not specified.
In reservation from PC-FAX or PC-IFAX, the use quantity limit is exceeded.
When reserving specified filing in document filing in PC-FAX or PC-IFAX;
•The pass-code for the folder is set on the machine side and the pass-code from
PC-XXX does not match with it.
•The pass-code for the folder is set on the machine side and no pass-code is
specified by PC-XXX.
Reservation cannot be made due to machine busy. (Reservation of PC-FAX
cannot be accepted.) (This does not occur in Dragon.)
Reserved with receive confirmation request in PC-IFAX, but the IFAX sender is
not registered on the machine side.
In reserving specified filing in PC-FAX or PC-IFAX, the machine has no filing
function.
When making a reservation of filing designation by PC-FAX or PC-IFAX, the filing
function on the machine is inhibited.
NIC connect failure (Network abnormality)
•Check for disconnection of cables.
•A network trouble (CE-xx) occurs.
•The port is set to disable.
•Authentication by the POP server is failed when POP before SMTP setting is
valid.
In internet FAX send, reply of receive confirmation of the remote machine is not
normal. (Including PC-IFAX).
•Error of the disposition-modifier .
•The disposition modifier is not in an error, and the disposition type is other than
displayed, dispatched, or processed.
In internet FAX send, time-out occurs in waiting for receive confirmation from the
remote machine. (Including PC-IFAX).
•In a case where send confirmation wait time-out time is other than 0, when send
confirmation reply from an internet FAX destination is not received.
•Recalls of the set number of recalls are performed, but send confirmation reply
from an internet AFX destination is not received.
In E-mail/FTP , internet FAX send, the send data size exceeds the upper limit of
send data.
In e-mail receive, a sender is registered in receive reject address/domain.
In e-mail receive, an error occurs in communication with POP3 server.
•Header acquisition error.
•Time-out during mail receive
AR-FX12 MACHINE OPERATION 7-7
Means of
communication
<P>
<P><B>
<B>
<S>
<S><R>
<R>
<R>
<S>
<S>
<S>
<S>
<S>
<S>
<S>
<S>
<S>
<S>
<R>

Advertisement

loading

This manual is also suitable for:

Ar-mm9