Sharp AR-FX12 Service Manual page 17

Main code 23
23-2
Purpose
Function (Content) Jam/Trouble data print
Section
Item
Operation/Procedure The current selected data is displayed on the
side of the menu.
SIMULATION 23-2
JAM/TOROUBLE DATA PRINT MODE. SELECT SETTING, AND
PRESS START.
0. TRAY SELECT
1. PRINT START
When "1" is selected,
press [START] key
SIMULATION 23-2
JAM/TOROUBLE DATA PRINT MODE.. EXECUTING .
0.TRAY SELECT
<List of display values>
0 TRAY SELECT (Selection disabled)
1 PRINT START
1
:AUTO ONLY
Press [CUSTOM SETTINGS] key
or [START] key
: 1
0
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-5
Main code 24
24-10
Purpose Data clear
Function (Content) Used to clear the FAX counter.
Section FAX
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT 1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME
Press [START] key.
SIMULATION 24-10
FAX SEND COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
<List of set values>
1 FAX SEND: Number of times of FAX sending
2 FAX RECEIVE: Number of times of FAX reception
3 FAX OUTPUT: FAX print quantity
4 SEND IMAGES: Sending quantity
5 SEND TIME: Time for sending
6 RECEIVE TIME: Time for reception
1
Press [CUSTOM SETTINGS] key
or [START] key
1