Sharp AR-FX12 Service Manual page 63

SW Bit Item
No. No.
103 7 Nighttime FAX mode
setting <When iFAX
receive setting is not
made>
8 Display setting in NW
trouble (CE-00, CE-01)
104 1 Pseudo-nighttime mode
setting <When iFAX
receive setting is made>
2-8 Not used
105 1-8 Not used
106 1-4 The number of resend in
iFAX communication
error (Setting in NG in
serve check request
respond)
5 iFAX date, sender's
name print language
select <Format>
6-8 Not used
107 1-5 Not used
6 Report output (receive
reject) <iFAX only>
7 Not used
8 Switch from the image
send display to the copy
display
Switch selection and function
Used to set whether the minimum low power consumption mode is set or not
when the right power switch is turned off. However, this function is valid only
when iFAX receive setting is not made.
1: Not enter the nighttime
FAX mode.
Used to set whether the operation panel is displayed or not when a network
trouble occurs in NIS card installation.
1: Trouble display is not
made.
Used to set whether the minimum low power consumption mode is set or not
when the right power switch is turned off. However, this function is valid only
when iFAX receive setting is made.
1: Not enter the pseudo-
nighttime mode.
(Enters the nighttime
mode.)
Used to set the number of resend in NG of serve check respond in iFAX send
with serve check request. The setting range is 0 - 15 times by binary input.
When set to "0," no resend is made.
Used to set the date and sender's name format in iFAX send.
1: North America format
Used to set whether the communication report is outputted or not in "Receive
reject" of iFAX receive. However, this function is valid only when the report
output (in iFAX receive) is set to "Not print."
1: Output
Used to set whether the image send display is switched to the copy display or
not.
1: Switch
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-51
0: Enters the nighttime
FAX mode.
0: Trouble display is
made.
0: Enters the pseudo-
nighttime mode.
(Not enter the
nighttime mode.)
0: Follows the date
format.
0: Not output
0: Not switch
USA Initial value Key
operator
0 Enters the
nighttime
FAX mode
0 Trouble
display
0 Enters the
pseudo-
nighttime
mode.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 Twice
0
1
0
0 Follows the
date format.
0
0
1
0
0
0
0
0
0 Not output
0
1 Switch