Originals That Can Be Faxed - Sharp AR-FX12 Service Manual

KEY OPERATOR PROGRAM
Fax Auto receive reduce setting
receive
Number of calls in auto reception
settings
Duplex reception setting*4
Print style setting
Set the telephone number for data forwarding
Fax output tray setting*5
Anti junk fax setting
Fax polling Fax polling security
security
Passcode number setting
*4 When the duplex module option is installed
*5 The trays that can be selected will vary depending on what peripheral devices have been installed.

2. Originals that can be faxed

A. Original sizes
Using the automatic document feeder
Using the document glass
NOTE
Originals that are not a standard size (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A5, B5, B5R, A4, A4R, B4, A3) can also be
faxed.
B. Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be automatically reduced.
Faxed document width
11" x 17" (A3)
11" x 17" (A3)
A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted.
Minimum original size
8-1/2" (width) x 5-1/2" (length)
(A5: 210 mm (width) x 148 mm (length))
5-1/2" (width) x 8-1/2" (length)
(A5R: 148 mm (width) x 210 mm (length))
Receiving machine's paper width
8-1/2" x 14" (B4)
8-1/2" x 11" (A4)
AR-FX12 MACHINE OPERATION 7-2
Set value(Default)
Engine section LCD
Enable*/ Disable
0, 1, 2* ~ 15
Enable/ Disable*
Print actual size cut off disabled/
Print actual size cut off enabled/Auto size select*
Enable/Disable*
Allowed/Not allowed*
11" (width) x 3-1/2" *(length)
(297 mm (width) x 800 mm (length))
11" (width) x 17" (length)
(297 mm (width) x 431.8 mm (length))
Reduced size
8-1/2" x 14" (B4)
8-1/2" x 11"R (A4R)
Remark
Maximum original size
Ratio (Area ratio)
1 : 0.64 (1 : 0.78)
1 : 0.5 (1 : 0.5)