Fax Mode (Condition Setting Screen) - Sharp AR-FX12 Service Manual

2. FAX mode (Condition setting screen)

The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND] key while the document filing mode (printer mode), copy mode,
or job status screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the
[IMAGE SEND] key is the condition settings screen (shown below). If you have set the display to show the address book screen (following page) when
the [IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the address book screen to display the condition settings screen.
"Default display settings" in the key operator programs can be used to select whether the condition settings screen (below) appears or the address
book screen (next page) appears when the [IMAGE SEND] key is pressed.
• When the network scanner option is installed, you can select whether the "E-MAIL/FTP" screen or the "INTERNET FAX" screen appears when the
[IMAGE SEND] key is pressed (the selection is made in the key operator programs).
A. Condition setting screen
The display is initially set (factory setting) to show the following condition setting screen as the initial screen.
1 Message display
2 [MODE SWITCH] key
3 ] key (Speed dial key) When a one-touch dial key or group key is stored in the address book, the machine automatically assigns it a 3-digit
[
4 [SPEAKER] key
5 [RESEND] key
6 [ADDRESS BOOK] key
7 [ADDRESS REVIEW] key
8 [SPECIAL MODES] key
9 [FILE] key*
10 [QUICK FILE] key*
11 Memory and reception mode
display
12 [SUB ADDRESS] key
13 Two-sided scanning icon
display
14 [ORIGINAL] key
15 [RESOLUTION] key
16 [EXPOSURE] key
17 Special mode icon display
* Can only be used on the AR-M355N/AR-M455N. The AR-M355U/AR-M455U models do not have this function.
READY TO SEND.
AUTO
EXPOSURE
STANDARD
RESOLUTION
AUTO
ORIGINAL
Messages appear here to indicate the current status of the machine. The icon at left indicates fax mode.
Use this key when the network scanner option is installed to switch between the "E-MAIL/FTP" and "INTERNET
FAX" screens
number. This key and the Speed Dial number can be used to abbreviate the transmission procedure.
Touch the [SPEAKER] key to dial and transmit a fax manually.
During dialing it changes into the [PAUSE] key, and after pressing the [SUB ADDRESS] key it changes into the
[SPACE] key.
Touch this key to redial the number most recently dialed with the numeric keys or a one-touch dial key. After dialing,
this key changes into the [NEXT ADDRESS] key.
Touch this key to display the address book screen (next page). Touch this key when you want to use an auto-dial
number (one-touch dialing or group dialing).
When performing a broadcast transmission, touch this key to check your selected destinations. The selected
destinations will appear and any unneeded destinations can be deleted.
Touch this key to select one of the following special functions:
•Edge erase •Dual page scan •Timer transmission •2in1 •Card shot •Job build mode •Polling •Memory box •Program
•Transaction report
Touch this key to store a document image that you are transmitting in the hard disk (this includes selecting a user
name, file name, and location).
Touch this key to store a document image that you are transmitting in the temporary storage folder.
This shows the amount of fax memory that is free and the currently selected reception mode.
Touch this key to enter a sub-address and passcode when using F-code transmission.
Icons appear here when you touch the [ORIGINAL] key and select two-sided scanning. The icons can be touched to
open function selection screens.
Touch this key when you wish to manually set the size of the original to be scanned or scan both sides of the
original.
Touch this key to change the resolution setting for the original to be scanned. The selected resolution setting will be
highlighted above the key. The initial factory setting is [STANDARD].
Touch this key to change the exposure setting for the original to be scanned. The selected exposure setting will be
highlighted above the key. The initial factory setting is AUTO.
When a special mode such as polling or dual page scan is selected, a special mode icon appears here.
AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2
RESEND
SPEAKER
FAX
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
SUB ADDRESS
FILE
AUTO RECEPTION
QUICK FILE
FAX MEMORY:100%