External Views And Internal Structures; Operation Panel - Sharp AR-FX12 Service Manual

[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES

1. Operation panel

Model Key name
AR-M355N/
AR-M455N
AR-M355U/
AR-M455U
1 Touch panel • Messages and keys appear in the touch panel. Touch the displayed keys to select functions and enter settings.
(following page)
• When a key in the touch panel is touched, a beep sounds and the key is highlighted.
• Keys that cannot be selected in a screen are grayed out. If touched, a double-beep will sound to alert you that the key cannot
be selected.
2 Mode select keys Use these keys to change modes.
3 [IMAGE SEND] Press to switch to fax mode. The main screen of fax mode will appear. The screen that appears when this key is selected can
key be changed with "Default display settings" in the key operator programs.
4 Numeric keys Use to enter fax numbers, sub-addresses, passcodes, and numerical settings.
5 [C] key (clear key) Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared
each time you press the key.When an original is being scanned, this key can also be used to cancel scanning.
6 [CA] key Use to cancel a transmission or programming operation. When this key is pressed, the operation is canceled and you return to
(clear all key) the main screen described on the following page. This key is also used to cancel resolution, paper size and special mode
settings.
7 [ ] key This is used to produce tone signals when you are on a pulse dial line.
8 [START] key Press to begin scanning an original for fax transmission.
Description in this manual
Described in the configuration where the
optional fax expansion kit (AR-FX12) is
installed on the AR-M355N/AR-M455N models.
No functions related to document filing or
Internet fax reception are described in this
manual.
AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1