Sharp AR-FX12 Service Manual page 21

46-15
Purpose Adjustment
Function (Content) Used to adjust the reading density in the FAX
mode (Super Fine mode).
(Only when FAX is installed.)
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX Super Fine mode individual adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: PRINT START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 0-14, AND PRESS START.
0. TRAY SELECT 1 1. PRINT START
2. EXP LEVEL 1
50
3. AUTO 4. 1.0
50
6. 3.0 7. 4.0
9. AUTO(H) 50 10. 1.0(H)
12. 3.0(H) 13. 4.0(H)
50
Select other than 0 - 2,
and press [START] key.
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE),INPUT VALUE 0-99, AND PRESS
START.
2. AUTO
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). NOW PRINTING.
Select 0, and
press [START] key.
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO 4. 1.0
6. 3.0 7. 4.0
9. AUTO(H) 10. 1.0(H)
12. 3.0(H) 13. 4.0(H)
1
50 50
5. 2.0
50 50
8. 5.0
50 11. 2.0(H) 50
14. 5.0(H)
50 50
Press [CUSTOM SETTINGS] key.
50
Press [CUSTOM SETTINGS] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTINGS] key.
1
Press [START] key or
press [CUSTOME SETTINGS] key.
5. 2.0
8. 5.0
1
11. 2.0(H)
14. 5.0(H)
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-9
<List of set values 1>
0 Paper feed tray selection
1 Print start (Default)
2 Exposure level selection
3 Auto
4 Exposure level 1
5 Exposure level 2
6 Exposure level 3
7 Exposure level 4
8 Exposure level 5
<Half tone>
9 Auto
10 Exposure level 1
11 Exposure level 2
12 Exposure level 3
13 Exposure level 4
14 Exposure level 5
<List of display values 1>
Normal display "NOW PRINTING"
ERROR display DOOR OPEN.
JAM
PAPER EMPTY.
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
<List of set values 3>
3 Auto
4 Exposure level 1
5 Exposure level 2
6 Exposure level 3
7 Exposure level 4
8 Exposure level 5
<Half tone>
9 Auto
10 Exposure level 1
11 Exposure level 2
12 Exposure level 3
13 Exposure level 4
14 Exposure level 5