Logging In To The Machine In Multiple Account Mode - Xerox WorkCentre 5022 User Manual

Product Overview

Logging in to the Machine in Multiple Account Mode

The following procedure describes how to log in to the machine when the machine is in Multiple
Account Mode.
For more information, refer to
1. Select a user.
Select User
User 01...
User 02...
User 03...
The passcode input screen appears.
Enter Login Passcode
[
2. Use the numeric keypad to enter the passcode which corresponds to the account number of the
selected user, and then press the OK button.
Enter Login Passcode
[* * * * * ]
Note The passcode is the same as the system administrator's passcode used for entering System
Administration mode from the control panel. For more information, refer to
Administration Mode
Press the Start button to confirm the entered passcode.
3.
If the entered passcode is correct, the machine enters Copy Mode.
3-22
User Control on page 9-48.
]
on page 9-1.
Start button
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
Entering System
User Guide