Default Settings; Copy - Xerox WorkCentre 5022 User Manual

Tools

Default Settings

Use the Default Settings screen to make default settings for the Copy, Scan and Fax features.
For information on how to display the Default Settings screen, refer to
page 9-1.

Copy

Sets the default advanced copy settings displayed when the control panel's Copy button is pressed.
Paper Supply
Sets the paper tray displayed in Paper Supply. Select the default paper tray to use for copying.
Auto is set at the time of factory shipment.
Tray 2, Tray 3, and Tray 4 are displayed when the optional paper trays are mounted.
The machine selects a paper tray whose tray is set to On for Auto Paper Selection to use for copying
when Auto is selected. If there is more than one paper tray available that satisfies the conditions, the
machine selects the tray with the highest priority to use for copying. However, those trays with the
setting of paper quality or paper size that does not support 2 Sided function are excluded from the
selection. The priority of the trays to use is Tray 1 > Tray 2 > Tray 3 > Tray 4 > Tray 5.
If an optional paper tray is set as default, the default setting returns to Auto if that tray is removed.
Reduce/Enlarge
Sets the default value displayed for Reduce/Enlarge.
You can select 100%, Auto, 50% A3A5, 70% A3A4, B4gB5, 81% B4A4, B5gA5, 86% A3B4,
A4gB5, 115% B4A3, B5A4, 122% A4B4, A5B5, 141% A4A3, B5B4, 200% A5A3, 5.5 x
8.5"11 x 17", or Preset XXX%.
Auto is set at the time of factory shipment.
Notes
• The value displayed for Preset XXX% is the value registered for Reduce/Enlarge Preset in Copy
Settings.
• When Auto is set, the machine reduces or enlarges the document to fit the specified paper size
when copying.
2 Sided
Set the default value displayed for 2 Sided.
9-8
System Settings Procedure
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
on
User Guide