Xerox WorkCentre 5022 User Manual page 250

Machine Status
Report/List
*1
Fax Activity Report
Fax Transmission Report
*1 *2
Fax Broadcast Report
*1 *2
Unprocessed Fax Job
Note The printed items will vary according to the machine's settings.
*1
The Fax Kit is required to use this feature.
*2
The machine automatically prints the report. For more information, refer to
34.
*3
The Network Kit is required to use this feature.
Follow the steps below to print a report or list.
1. Press the Machine Status button.
Machine Status button
10-8
Description
Used to check whether faxes were sent/received normally. For each
sent/received fax, prints the sender or recipient name and the transmission
result/status.
This report is not printed in the following cases:
• When sending a fax using the redial function
• When the fax waiting to be sent was deleted during transmission standby
or Redial standby
• When the power was shut off or a system error occurred during
transmission
The machine can be set up to automatically print transmission results after
every 50 faxes are sent/received.
For information on how to set the machine to print the Fax Activity Report
automatically, refer to
For information about the items in the Fax Activity Report, refer to
Report on page 14-19).
Prints the communication results.
*1 *2
Prints the broadcast communication results.
Prints the list of accumulated documents being deleted due to power cut. This
report is automatically printed when the machine power is switched on.
Activity Report on page 9-39.
®
Xerox WorkCentre
Fax Activity
Fax Settings on page 9-
®
5022/5024 Multifunction Printer
User Guide