List Of Tools Menu Items Displayed In System Administration Mode - Xerox WorkCentre 5022 User Manual

Tools
List of Tools Menu Items Displayed in System
Administration Mode
The table below lists the default settings you can change. The items displayed will vary according to
your machine's configuration.
Item
Default Settings
Copy
ID Card Copy
Scan
Fax
Device Information
Tray Settings
Custom Paper Size Settings
Control Panel Language
Default Display
Phone Book
Speed Dial
Group
Wired Network
Ethernet
TCP/IP
IP Filter
9-4
Description
Used to set the default values of the setting items shown on
the control panel display.
Used to set the default values of the setting items in the
Copy screen.
Used to set the default values of the setting items in the ID
Card Copy screen.
Used to set the default values of the setting items in the
Scan screen.
Used to set the default values of the setting items in the Fax
screen.
Used to check the Product Name, Serial Number, Printer
Name, System Admin. E-mail Address, Firmware Version,
IPv4, and IPv6 settings.
Used to set the paper type (paper quality) in the paper
trays. Also used to set the paper size for Paper Tray 5.
Used to set non-standard paper sizes for Customs (1 to 5)
for Tray 5 (bypass).
Used to set the user interface language used in the control
panel display.
Used to set the initial screen to appear in the control panel
at power on.
Used to creates a Phone Book for the fax transmission
function.
Used to register and change names and fax numbers.
Used to register or change groups for the Speed Dial
function.
Used to make network environment settings.
Used to set the Ethernet environment to use.
Used to set TCP/IP.
Used to restrict the IP addresses that can access the
machine.
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
See Page
P. 9-8
P. 9-8
P. 9-10
P. 9-10
P. 9-12
P. 9-15
P. 9-16
P. 9-18
P. 9-19
P. 9-20
P. 9-21
P. 9-21
P. 9-24
P. 9-27
P. 9-27
P. 9-27
P. 9-29
User Guide