Xerox WorkCentre 5022 User Manual page 171

2. Press the Scan button.
Scan button
Note In the displayed screen, you can enter the two-digit number of registered computer using
the numeric keypad, and then go to step 5.
3. Press the Address Book button.
Address Book button
Select the desired address of computer, and then press the OK button.
4.
PC(Network) [#]:Info Jump to [_ ]
01 pc1
02 Smith
03 pc2
Notes
- You can also enter the two-digit number of registered computer to jump to the specified
computer.
- To check the address registered for a computer, select it and press the # button. When you
have checked the address, press the OK button.
5. Make advanced settings as needed.
Scan to [01]
Color Mode... Color
File Format... PDF
Original Size... A4
For more information on advanced settings, refer to
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide
200
Advanced Scanner Settings
Scan
on page 7-15.
7-11