About The Default Display Screen; Setting The Default Display - Xerox WorkCentre 5022 User Manual

Product Overview

About the Default Display Screen

The Default Display screen lets you change the Default Display Screen — the screen displayed when
turning the power on and after returning from Energy Saver mode.

Setting the Default Display

You can set the default displayed screen from Copy, Fax, or Scan screen.
Note Some screens cannot be set on some models.
1. Press and hold the Log In/Out button for at least 4 seconds.
Log In/Out button
The passcode input screen appears.
Note The passcode is initially set to "1111"(four "1" digits).
System Admin. Passcode
[
Use the numeric keypad to enter the passcode, and then press the OK button.
2.
Note The Log In/Out button lights when the machine is in System Administration mode.
System Admin. Passcode
[* * * * * ]
3-18
]
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide