Quick-Button Selection Timer - Xerox WorkCentre 5022 User Manual

Machine Status

Quick-Button Selection Timer

You can set the displayed time length of the setting screens when a Quick-Button is pressed.
By default, the time length is set to 2 seconds.
Press the Machine Status button.
Machine Status button
4. Select Quick-Button Selection Timer, and then press the OK button.
Machine Status
Notification Di...
ID Card Guidance...
Quick-Button Se...
5. Select the desired time, and then press the OK button.
Quick-Button Selection Timer
2 seconds 4 seconds
3 seconds
4 seconds
10-12
Toner Status:
OK
Drum Status:
OK
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide