Reduce/Enlarge - Xerox WorkCentre 5022 User Manual

Reduce/Enlarge

You can set the copying zoom ratio.
1. Select Reduce/Enlarge, and then press the OK button.
Copy
Paper Supply...
Reduce/Enlarge...
Pages per Side...
2. Select the reduction/enlargement factor, and then press the OK button.
Reduce/Enlarge
[25-400] Auto
Auto 50% A3 → A5
+
- 70% A3 → A4,B4 → B5
In the machine status diagram, the selected zoom ratio is displayed on the Reduce/Enlarge display.
100%
Auto
Fixed zoom ratio
Preset XXX%
Magnification Table
When you make enlarged or reduced copies from standard size documents on standard size paper, the
following copy ratios will apply.
Copy /
A5
Documents
A5 100%
B5 81%
A4 70%
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide
111
1
Auto
Auto
Off
Qty. 1
The machine makes the copy the same size as the document.
Note: Use the numeric keypad or
reduction/enlargement zoom ratio. You can set a value between 25 and 400% (in
1% increments).
The machine automatically sets an appropriate zoom ratio by calculating the
document size and the paper size specified in Paper Supply, to enable the document
to fit on the page.
The machine reduces or enlarges the copy according to the selected zoom ratio.
The machine reduces/enlarges copies by the set zoom ratio.
The value displayed as the preset reduction/enlargement zoom ratio is the value set
by selecting Tools > Copy Settings > Reduce/Enlarge Preset in System
Administration mode.
B5
122%
100%
86%
and buttons to set the desired
A4 B4
141% 174%
115% 141%
100% 122%
Copy
A3
200%
163%
141%
5-19