Lighten/Darken - Xerox WorkCentre 5022 User Manual

Copy
2. Select the desired setting as needed.
Copy
Paper Supply...
Reduce/Enlarge...
Pages per Side...

Lighten/Darken

You can set the density from five levels. The farther left the position of
farther right, the lighter and toner saver mode.
Press the Lighten/Darken button.
1.
Lighten/Darken button
Brightness level and Toner Saver changes every time the Lighten/Darken button is pressed. The
2.
selection is applied when the screen returns to the main menu screen without pressing the OK
button.
You can change the displayed time length of the setting screen.
For more information on changing the displayed time length of the setting screen, refer to
Button Selection Timer
Dark +2 Creates copies with the darkest density. Use this setting to scan
documents containing light objects.
Dark +1 Creates copies with a fairly dark density. Use this setting to scan
documents containing fairly light objects.
Normal Creates copies with the same density as the document.
Light +1 Creates copies with a fairly light density. Use this setting to scan
documents containing fairly dark objects.
5-14
111
1
Auto
Auto
Off
on page 10-12.
, the darker the copy; the
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
Quick-
User Guide